1. Home
  2. Review
  3. 5 Axis Machine
  4. 5 Axis Machine - Marble Cutting Machine

5 Axis Machine - Marble Cutting Machine


This 5 axis water jet cutting machine is specially used to cut marble and granite, it can compensate 10° cutting angle. It is a kind of bevel cutting machines.

Due to the water jet cutting is a way of flexible cutting, therefore the product cross section after cutting by the traditional 3 axis water jet cutting machine will have a certain degree of inclination. In order to ensure the accuracy of vertical cutting section, it must reduce the cutting speed. However, our 5 axis water jet cutting machine can ensure the accuracy of vertical cutting section by compensating the cutting angle, without reducing the cutting speed. So that it can be used for cutting parquet stone, the parquet flooring does not need to be polished again, which can save time and labor.

Detailed Drawing
General Technical Characteristics
Table Model Unit YC-L2015 YC-L2515 YC-L3015 YC-L3020 YC-L4020 YC-L4030 YC-X1520
Cutting area mm 2000 * 1500 2500 * 1500 3000 * 1500 3000 * 2000 4000 * 2000 4000 * 3000 1500 * 2000
Cutting accuracy mm +/- 0.1 +/- 0.1 +/- 0.1 +/- 0.1 +/- 0.1 +/- 0.1 +/- 0.1
Positioning accuracy mm +/- 0.05 +/- 0.05 +/- 0.05 +/- 0.05 +/- 0.05 +/- 0.05 +/- 0.05
Repeatability mm 0,025 0,025 0,025 0,025 0,025 0,025 0,025
X,Y dry-run speed m/min 0-15
Cutting speed m/min According to the cutting material and thickness
Motion for X.Y HIWIN/TBI ball screw and guideway, Mitsubishi servo motor to drive
Materials to cut Copper, steel, rubber, marble, granite, plastic, glass, aluminium, etc. (almost all kinds), thickness 0-120mm
Supply condition Air, water, electricity, abrasive (garnet), hydraulic oil
Max. pump pressure mPa 380/410 380/410 380/410 380/410 380/410 380/410 380/410
Power kW/ hp 30-37/40-50 30-37/ 40-50 30-37/ 40-50 30-37/40-50 30-37/40-50 30-37/ 40-50 30-37/ 40-50
Controlled by Siemens LOGO LOGO LOGO LOGO LOGO LOGO LOGO
Inlet water supply mpa >0.4 >0.4 >0.4 >0.4 >0.4 >0.4 >0.4
Software Shanghai NAIKY software (NC STUDIO) / MITSUBISHI servo drive / ADVANTECH industrial computer
Bevel axis(A): +/- 10° Rotary axis(B): +/- 10°
Machine power (can be customized) V(3ph,50/60hz) 220/380/415 220/380/415 220/380/415 220/380/415 220/380/415 220/380/415 220/380/415
Cutting Samples