1. Home
  2. Review
  3. Automatic Welding Manipulator

Automatic Welding Manipulator


This product has been discontinued and removed from our shelves.

1. According to its loading capacity, effective stretching and elevating range, the automatic welding manipulator can be divided into light type, medium type, heavy type and ultra-heavy type.
2. Three structural configurations are available, namely the stationary type, stationary and rotary type, movable and rotary type.
3. The section areas of the boom and the column are determined using scientific calculation. The horizontal boom drooping is 2mm/m.
4. The boom of our automatic welding manipulator is equipped with a ratchet structured anti-falling device to ensure safety and reliability.
5. A cross fine tuner is located on the terminal of the boom to allow manipulation via remote control.
6. Our welding manipulator adopts eccentric shaft which can decrease clearance between the roller and rail
7. Column revolve unit can support motor driven as well as manual driven.
8. The control unit is composed of control board and remote control box. A control interface for positioner and turning rolls are also available.
Main Technical Parameters
Model Small/Light duty type
LH1010 LH2020 LH3030 LH4040 LH5050 LH6060 LH7070 LH8080
Lifting stroke (mm) 1000 2000 3000 4000 5000 6000 7000 8000
Retracting stork (mm) 1000 2000 3000 4000 5000 6000 7000 8000
Lifting speed (mm/min) 435(Small duty type)1000(Light duty type) 1000 1000 1000 1000 1000 1000
Retracting speed (mm/min) 120-1200
Minimum distance between boom and track surface(mm) 740(moving with rotation) 690(fixed with rotation)
Boom end maximum weight loading (kg) 80
Column traveling Manual control or automatic control automatic control
Trolley traveling Manual control or automatic control automatic control